To begin the installation process of the Wavlink AC1200 router you will need to login in first. Also, if you want to do any changes or modifications to the Wavlink AC1200 router device then you will also need to do the login process. Now, consider all the below information to know all the entire directions about the Wavlink AC1200 router device.
Log Into Wavlink AC1200 Router
There are two different ways by which you can quickly access the Wavlink router login page. Choose or pick one of these methods and visit the Wavlink router web management page.
Through Web Browser Do Login Process
First, connect the Wavlink router device to the power socket and the networks start appearing in the WiFi network list. Now, take the WiFi gadget and make the connection between it and the Wavlink AC1200 router. After connecting the device to the router, open the web browser on it and fill in the Wavlink default IP address in the search engine. Later, fill in all the details which are shown on the sign-in page. If you are doing this process for the first time then fill in the default credentials. Hence, doing this the Wavlink router login process is completely done now.
By The Wavlink Smart App
To start this, open the Google Play Store on your Android phone or the Apple Store on your iOS device. (Open the Apple Store only if you are having an IOS device). Now, in the search field look for the Wavlink application and pick the correct one and install it. Later, open the application and the login page will open up on your phone display. Details such as username and password. In case you don’t know the login details then check the tag of the device and the manual booklet which comes along with the Wavlink router device.
WiFi Protected Configuration For Router
- First, locate both devices away from the metal or electronic gadgets.
- After that, push the dedicated WPS button of both the router and modem device.
- Later, check the LED indication of both units to get to know about the process condition.
- When the LEDs blink solid then it means the Wavlink AC1200 setup process is complete now, without facing any trouble.
Tip: If you are facing trouble then try the below troubleshooting tips to fix the issue.
Turn On/Off Wavlink AC1200 Router
First, press the power button of the Wavlink AC1200 router and turn it off. After that, take out the plug from the socket. Now, wait for a short while and power on the back Wavlink AC1200 router. In the end, place the plug of the Wavlink AC1200 router in the socket. By doing this the Wavlink router setup trouble is fixed.
Improve Wavlink AC1200 Router Performance
First, go to the Wavlink web management page by entering the default web portal wifi.wavlink.com in the address bar. After that search for the administration option and then click on software upgrade. Now, install the software file on your computer or laptop if you find any. In the end, restart the Wavlink AC1200 router device to finish this method process.
Reset Wavlink AC1200 Router
First, look for the reset button on your Wavlink AC1200 router device. After that, take the thin pin and insert it into the reset button of the Wavlink AC1200 router. Now, all the LEDs of the Wavlink AC1200 router will power off. As it means the router device is now completely reset.
Note: After resetting the Wavlink AC1200 router you will need to do the login and installation process again.
Tip: If you want to extend the range of the Wavlink AC1200 router WiFi signals then you will have to purchase an extender. In my experience, the Wavlink AC600 extender is best for your Wavlink AC1200 router.
Benefits Of Wavlink AC1200 Extender
- Extend the range of existing router WiFi signals.
- Locate the AC600 extender in any place of office or house.
- Compatible with any type of existing router.
- By tapping one button it does its installation.
Setup AC600 Extender By WPS Button
First, place the AC600 extender near the router. After that, wait for a few minutes to see if the power LED starts blinking. Now, press the WPS button of the Wavlink AC600 extender and in a few seconds press the router WPS button. Next, wait for a while to see the solid WPS LED on both extender and router gadgets. As it means the extender and router successfully linked to each other.
By doing this the Wavlink AC600 setup is done and you can enjoy the fast internet speed at every place of the office and house.
Hence, after the entire information on this page, you will be able to do the Wavlink AC1200 router setup process by yourself without taking any technician’s help. If you want much more updates related to the Wavlink device then stay closer to this post.
